Hardness | 39-42HRC |
Tensile Strength | ≥ 1320MPa |
Ultimate Tensile Load | ≥406000N |
Chemical Composition | C:0.32-0.40 Si:0.17-0.37 Mn:0.40-0.70 Cr:0.15-0.25 |
Model | HINO Wheel Bolt with Wheel Nut |
Reference No. | |
Thread Pitch | M20×1.5 |
Length | 78mm |
Quality | 10.9, 12.9 |
Material | 40Cr, 42CrMo (ASTM5140, 4140) |
Surface | Black Oxide, Phosphate |
Logo | as required |
MOQ | 3000pcs each model |
Packing | neutral export carton or as required |
Delivery Time | 15-40 days |
Payment Terms | T/T, 30% deposit+70% paid before shipment |
More Models/Sizes Available for HINO Wheel Bolt (We make Strictly according to your drawings or samples)
BRAND | M | L | L1 | H | Nut Size |
Hino EM100 Front | M20x1.5 | 78 | 37 | 10 | SW41xH26 |
High-Quality round rods
Steel Grade | Use | Rockweell Hardness (GB/T4340.1-1999) |
Implementing Standard |
45 (SAE1045,S45C/S48C) |
For Grade 8.8 | HRC28-32 | GB/T 699 |
40Cr (SAE5140,SCr440) |
For Grade 10.9 | HRC32-39 | GB/T 3077 |
35CrMo (SAE4135,SCM432/SCRRM3) |
For Grade 12.9 | HRC39-42 | GB/T 3077 |
42CrMo (SAE4140,SCM440) |
For Grade 12.9 | HRC39-42 | GB/T 3077 |
High-Strength Bolt Drawing
The purpose of the drawing process is to modify the size of the raw materials, and the second is to obtain the basic mechanical properties of the fastener through deformation and strengthening. If the distribution of the reduction ratio of each pass is not appropriate, it will also cause torsional cracks in the wire rod wire during the drawing process. In addition, if the lubrication is not good during the drawing process, it can also cause regular transverse cracks in the cold drawn wire rod. The tangent direction of the wire rod and the wire drawing die at the same time when the wire rod is rolled out of the pellet wire die mouth is not concentric, which will cause the wear of the unilateral hole pattern of the wire drawing die to aggravate, and the inner hole will be out of round, resulting in uneven drawing deformation in the circumferential direction of the wire, making the wire The roundness is out of tolerance, and the cross-sectional stress of the steel wire is not uniform during the cold heading process, which affects the cold heading pass rate.
Professional manufacturer since 1985, 23000m2 workshop, 300 highly trained workers, full complete CNC production equipment, advanced lab testing facilities,Main products are wheel bolt, wheel nut, spring u style bolt, center bolt.
Q1 what about your quality control?
We always test material, the hardness, tensile, salt spray and so to guarantee the quality.
Q2 what is your payment terms?
We can accept TT,L/C,MONEYGRAM,WESTERN UNION and so on.
Q3 can you offer free samples?
If we have stock samples, we can offer free samples, please pay express fee yourself.
Q4 can I visit your factory?
Yes, sincerely welcome to visit our factory.
Q5 what is the grade of hub bolt?
For truck hub bolt, usually it is 10.9 and 12.9
Q6 do you offer OEM service?
Yes, we can offer OEM service.
Q7 what is your MOQ?
It depends on products, usually hub bolt MOQ 3500PCS,center bolt 2000PCS,u bolt 500pcs and so on.